Complete ISO 20345 overview
Certified standards for safety footwear
There are 2 MAIN STANDARDS for safety footwear: ASTM 2413 & EN ISO 20345. Besides these 2 main standards, Safety Jogger pays attention to other safety footwear standards as well (AS/NZS, JIS, LA, SNI, SIRIM, GOST, OHSC) but they are generally based on ASTM & ISO, which are explained below.
ASTM 2413 - 17
The American Society for Testing and Materials (ASTM) is an international standards organization that develops and publishes voluntary consensus technical standards or certifications. ASTM announced in 2005 that their ANSI Standard was withdrawn and replaced by two new ASTM standards, titled F2413 Standard for Performance Requirements and F2412 Standard for Foot Protection Test Methods. These new safety footwear standards provide safety and performance previously put forward by ANSI since 1967.
The biggest difference with ASTM 2413 conforming safety footwear to other standards is that the outsole must be completely insulated for electric shocks. Other requirements for ASTM 2413 conforming safety footwear are impact / compression resistance for the toe area, puncture resistance for safety shoes, and more.
EN ISO 20345 - 11
The current safety footwear standard across Europe is updated in 2011 to make it stricter, all products must be manufactured, tested and certified under EN ISO 20345. This safety footwear standard requires all safety shoes to have front foot protection against a 200 joule impact. This is the amount of energy the toe region can absorb before breaking. Under the EN ISO 20345 standard there are different safety classes like S1 or S3 for example. Every safety shoe according to the EN ISO 20345 safety footwear standard will be tested on all possible aspects and will be granted an S-class. Below you can find a complete overview of the minimum requirements for each safety class within the EN ISO 20345 safety footwear standard.
Safety footwear ISO standard EN ISO 20345
Safety footwear that requires a safety toecap
Occupational footwear ISO standard EN ISO 20347
Safety footwear that does not require a safety toecap
Do you need any advice or do you still have some questions left about safety footwear standards and certifications? Don’t hesitate to contact us right away, We're social!
You might also like to read
Best socks for work boots
You’re up on your feet all day long. It goes without saying that you take good care of them? This is where the new Safety Jogger work socks come in: they give your feet the comfort and support they deserve.
Socks
ESD vs. antistatic: what is the difference?
Small sparks can sometimes have large consequences. Antistatic or ESD shoes avoid those sparks by sending electrical charges to the ground. But what is the difference between these two types of shoes?
ESD
Slip resistance: what is the difference between SRA, SRB and SRC?
Did you know that slips, trips, and falls are the most common causes of workplace accidents? Anti-slip shoes help you avoid these accidents. But what is the difference between shoes with an SRA, SRB or SRC rating?
Slip resistanceGROW YOUR BUSINESS & BECOME A DEALER
Safety Jogger is worldwide and always looking for people who trust our brand as much as we do! We have a team of expert's ready for you to help with questions about our brand, technologies or reselling our products. So, don’t hesitate to fill in this form, we usually get back to you within a day!
Further information?
Fill in the form and we’ll get in touch!